Trommel Screen - Trunnion StyleSpecifications | Safety Features
The REMCON TRUNNION STYLE TROMMEL SCREEN is for sorting any mix of recyclables, including paper. A variety of screen opening sizes are available. The trunnion style screen has no inside frame members for bags and other debris to collect on.
SPECIFICATIONS
DIMENSIONSScreen Drum -- 36” to 72” diameter x 10’ long. Overall dimensions -- 7 ’- 2” x 12’ - 6” long.
IN-FEED AND OUT-FEED CHUTESCustom built to receive material from conveyors or other chutes.
REPLACEABLE SCREEN CONSTRUCTIONThe screen is divided into four ¼-circle sections of plate that are easily bolted into the screen frame. These plates are ¼” AR Steel, rolled to fit inside the screen frame, and are easily replaceable.
SCREEN FRAME CONSTRUCTIONThe frame end flanges are CNC burnt, rather than rolled, making the drum rounder, for smoother rolling on the trunnion wheels.
SCREEN DRIVE METHODThe trommel screen is rotated by a belt that is wrapped around the trommel drum and a sheave mounted on the gear reducer. A simple tensioning device provides easy belt tension adjustments.
THRUST AND TRUNNION WHEELSHeavy-duty steel castors with polyurethane wear surfaces.
GEAR REDUCER, MOTORBrook Hansen helical gear reducer, meets American Gear Manufacturers Association class 2 rating. Motor -- Teco-Westinghouse 3 HP, severe duty, TEFC, 1.15 service factor, class F insulation for long motor life. Screen RPM - 8.75.
GUARDSAll moving components are guarded to meet OSHA requirements.
SAFETY FEATURES
ENCLOSED HOUSING
The Remcon Trunnion Style Trommel Screen is completely enclosed with a hinged housing design. The drum & wheels are covered by hinged guards for easy maintenance access. Belt edges, pinch points and all hazardous drive components have all been covered to maximize safety.
EMERGENCY STOP SYSTEMRemcon provides an emergency stop system as required per system layout.
Trommel Screen - Center Axle StyleSpecifications | Safety Features
The REMCON TROMMEL WITH CENTER AXLE is a simple, low cost design, for sizing broken glass or cleaning debris from sorted loose containers such as aluminum cans or plastic bottles. Not to be used with materials that will wrap up in the center axle such as plastic bags, rags, etc. This design has the advantage of being lower in cost and is simpler than the trunnion style screen.
SPECIFICATIONS
DIMENSIONS36” diameter x 90” long drum, for sizing broken glass or cleaning debris from sorted loose containers such as aluminum cans or plastic bottles.
CHUTE, IN FEED ENDCustom built to receive material from upstream machine (conveyor, etc).
CHUTE, DISCHARGE ENDCustom built to feed onto machine downstream from trommel.
DRIVE METHODAn axle, which is mounted through the center of the screen, is driven from the discharge end of the screen with a shaft mounted gear reducer.
FRAMEWelded structural steel.
GEAR REDUCERDodge "Torque-Arm 2", parallel gear, shaft- mounted, meets American Gear Manufacturers Association class 2 rating
GUARDSAll moving components are guarded to meet OSHA requirements.
LEGSAdjustable tube steel construction.
MOTORTeco-Westinghouse 1 HP, severe duty, TEFC, 1.15 service factor, class F insulation for long motor life.
SCREEN CONSTRUCTIONHigh carbon woven steel wire or abrasion resistant perforated plate.
SAFETY FEATURES
FULLY ENCLOSED HOUSINGThe Remcon Center Axle Style Trommel Screen is completely enclosed with a hinged housing design. Belt edges, pinch points and all hazardous drive components have all been covered to maximize safety.
EMERGENCY STOP SYSTEMRemcon provides an emergency stop system as required per system layout.
| 
